UE防爆开关H121-164BH121-126B（American ue explosion-proof pressure switch H121-164B H121-126B ）

American ue explosion-proof pressure switch H121-164B H121-126B     working principle The working principle of the pressure switch: When the pressure in the system is higher or lower than the rated safety pressure, the disc in the sensor moves instantaneously, and the switch joint is connected or disconnected by connecting the guide rod. When the pressure drops or rises When the rated recovery value is reached, the disc resets instantaneously and the switch automatically resets, or in simple terms, when the measured pressure exceeds the rated value, the free end of the elastic element is displaced, and the switch element is pushed directly or after comparison to change the switch element. On-off state to achieve the purpose of controlling the measured pressure. The elastic components used in the pressure switch include single coil spring tube, diaphragm, bellows and so on. related terms Accuracy: A value indicating the degree of precision of the device, including linearity, tolerance, hysteresis, repeatability, etc. At present, the highest precision of Nagano's pressure switch can reach ±0.5%FS, and the model is CB33. Maximum pressure (Max.P): the maximum value of the pressure range. Full Scale (FS): The difference between the maximum and minimum values ​​of the pressure range. Connection difference (dead zone): It refers to the difference between the switch setting action value and the reset value. For example, when the set value is 1MPa and the actual reset value is 0.9MPa, the connection difference is 0.1MPa. Working temperature: refers to the temperature range in which the internal mechanism and sensitive components of the instrument will not undergo continuous deformation during operation. Generally, the recommended operating temperature range of the pressure switch is -5~400C. If the temperature of the medium is too high, it can be considered to add an accessory siphon (filling shape) to achieve the purpose of cooling. SPDT (Single Pole Double Throw): Consists of a normally open, a normally closed contact and a common terminal. DPDT (Double Pole Double Throw): It consists of a symmetrical left and right common terminal, and two sets of normally open and normally closed terminals. Upper limit one contact (normally open): When the pressure rises to the set value, the contact will act and the circuit will be turned on. Lower limit one contact (normally closed): When the pressure drops to the set value, the contact will act and the circuit will be turned on.Performance Options Wide range of microswitches available: 1 Amp to 30 Amps and up to 480 VACSPDT and DPDT and Hermetically Sealed SwitchesAdjustable DeadbandExternal Manual ResetHastelloy., Monel. And sensor materials150# and 300# flangesIndustrial applicationz Used in the following fields to implement alarm, start and shut down dangerous device switches, vacuum switches, differential pressure switches and temperature switches:chemical plants; oil pipelines; oil refineries; coal Powder and grain dust treatment; pure gas pipeline; gas buffer system; storage tank and pressure pump, compressor and steam turbine 

注：除UE防爆开关H121-164BH121-126B，更多United Electric(UE)型号欢迎电话或在线联系。

本文出自 深圳沃德科技官网，转载时请注明出处及相应链接。

本文永久链接：https://www.szword.com/zs/ue43189.html