J120-454-M201UE防爆压力开关5.5-210KPa（J120-454-M201 UE explosion-proof pressure switch 5.5-210KPa ）

J120-454-M201 UE explosion-proof pressure switch 5.5-210KPa Model: J120-454-M201   Range:0.8-30psi 55.2mbar~2.1barWetted material: Nitrile rubber diaphragm and O-ring 1/4NPT inner wire aluminum pressure Interface and cover  dead zone/hysteresis:0.05-0.2psi 3.4-13.8mbar Zui Maximumpressure: 80"wc 1.4bar pressure resistance 225PSI/15.5bar Functional characteristics of  explosion-proof pressure switch 1. The performance of explosion-proof pressure switch is stable and reliable 2. Structure Simple, no removable parts 3. SPDT or DPDT output 4. Cast aluminum shell, optional explosion-proof 5. Various pressure and electrical interface optional 6. Explosion-proof pressure switch has control function; 7. Explosion-proof pressure switch adopts pressure sensor; 8 . Reliable switch signal; 9. Higher precision and faster response than mechanical pressure switch; 10. Explosion-proof pressure switch is convenient for on-site installation, setting and debugging 11. Fully sealed type quick dry contact switch with terminal box 12. Continuous adjustment; adjustment withoutExplosion -proof pressure switch is suitable for various industrial sites and can ideally replace similar foreign products. 14. Various types of sensing component materials, including welded stainless steel diaphragm and bellows.Working principle of explosion-proof pressure switch The explosion-proof pressure switch achieves the explosion-proof effect by sealing the wiring contacts in a solid space through a strong sealed shell. The working principle of the explosion-proof pressure switch is that the pure mechanical deformation causes the action of the micro switch. When the pressure increases, the different sensing pressure components (diaphragm, bellows, piston) will be deformed and will move upward, and finally activate the micro switch on the upper end through the mechanical structure such as the railing spring to output the electrical signal. The setting method is further divided into continuous displacement type and force balance type from the functional principle. Explosion-proof pressure switches can be divided into mechanical explosion-proof pressure switches and electronic explosion-proof pressure switches according to the principle, and mechanical types are divided into ordinary and sealed types. Accuracy: A value indicating the degree of precision of the device, including linearity, tolerance, hysteresis, repeatability, etc. At present, the highest precision of Nagano's pressure switch can reach ±0.5%FS, and the model is CB33.  Maximum pressure (Max.P): the maximum value of the pressure range. Full Scale (FS): The difference between the maximum and minimum values ​​of the pressure range. Connection difference (dead zone): It refers to the difference between the switch setting action value and the reset value. For example, when the set value is 1MPa and the actual reset value is 0.9MPa, the connection difference is 0.1MPa. Working temperature: refers to the temperature range in which the internal mechanism and sensitive components of the instrument will not undergo continuous deformation during operation. Generally, the recommended operating temperature range of the pressure switch is -5~400C. If the temperature of the medium is too high, it can be considered to add an accessory siphon (filling shape) to achieve the purpose of cooling. SPDT (Single Pole Double Throw): Consists of a normally open, a normally closed contact and a common terminal. DPDT (Double Pole Double Throw): It consists of a symmetrical left and right common terminal, and two sets of normally open and normally closed terminals. Upper limit one contact (normally open): When the pressure rises to the set value, the contact will act and the circuit will be turned on. Lower limit one contact (normally closed): When the pressure drops to the set value, the contact will act and the circuit will be turned on.   Serial number-model set point adjustable range dead zone maximum overpressure range withstand pressure pressure port wetted material J120-152 0.1 to 3.4 bar 6.9 to 34.5 mbar 3.4 bar 5.2 bar 1/4" NPTF Ni Plated Brass-Brass J120-172 0.1 to 3.4 bar 6.9 mbar to 0.1 bar 34.5 bar 68.9 bar 1/2" NPTF 316L st/st J120-184 0.1 to 3.4 bar 20.7 mbar to 0.2 bar 34.5 bar 68.9 bar 1/2" NPTF 316 st/st-316L st/st-Viton J120-484 0.1 to 3.4 bar 20.7 mbar to 0.2 bar 34.5 bar 68.9 bar 1/2" NPTF 316 st/st-316L st/st-Viton J120-S152B 0.1 to 3.4 bar 6.9 to 34.5 mbar 3.4 bar 5.2 bar 1/2" NPTF 316L st/st J120-156 0.1 to 6.9 bar 13.8 to 41.4 mbar 6.9 bar 8.6 bar 1/4" NPTF Ni Plated Brass-Brass J120-173 0.3 to 6.9 bar 6.9 mbar to 0.2 bar 34.5 bar 68.9 bar 1/2" NPTF 316L st/st J120-185 0.3 to 6.9 bar 34.5 mbar to 0.4 bar 34.5 bar 68.9 bar 1/2" NPTF 316 st/st-316L st/st-Viton J120-191 0.7 to 6.9 bar 0.1 to 0.6 bar 103.4 bar 172.4 bar 1/2" NPTF 316 st/st J120-356 1.0 to 6.9 bar 48.3 mbar to 0.1 bar 6.9 bar 55.2 bar 1/4" NPTF 316L st/st J120-485 0.3 to 6.9 bar 34.5 mbar to 0.4 bar 34.5 bar 68.9 bar 1/2" NPTF 316 st/st-316L st/st-Viton J120-491 0.7 to 6.9 bar 0.1 to 0.6 bar 103.4 bar 172.4 bar 1/2" NPTF 316 st/st J120-555 0.1 to 6.9 bar 13.8 to 27.6 mbar 6.9 bar 15.5 bar 1/4" NPTF 316L st/st-Teflon-Viton J120-566 0.7 to 6.9 bar 0.1 to 0.8 bar 68.9 bar 103.4 bar 1.5" Sanitary 316L st/st J120-702 0.2 to 6.9 bar 0.1 to 0.3 bar 34.5 bar 68.9 bar 1/4" NPTF Ni Plated Brass-Buna N-Buna N J120-S156B 0.1 to 6.9 bar 13.8 to 41.4 mbar 6.9 bar 8.6 bar 1/2" NPTF 316L st/st J120-15835 0.3 to 6.9 bar 0.2 to 0.6 bar (ADJ) 34.5 bar 68.9 bar 1/4" NPTF Ni Plated Brass-Buna N-Buna N J120-164 0.3 to 13.8 bar 13.8 mbar to 0.1 bar 13.8 bar 13.8 bar 1/4" NPTF Ni Plated Brass-Brass J120-174 0.6 to 13.8 bar 6.9 mbar to 0.2 bar 34.5 bar 68.9 bar 1/2" NPTF 316L st/st  

注：除J120-454-M201UE防爆压力开关5.5-210KPa，更多United Electric(UE)型号欢迎电话或在线联系。

本文出自 深圳沃德科技官网，转载时请注明出处及相应链接。

本文永久链接：https://www.szword.com/zs/ue45748.html