H121-612-1010-M201进口美国UE双刀双掷防爆压力开关（【H121-612-1010-M201】Imported American UE double pole double throw explosion-proof pressure switch ）

【H121-612-1010-M201】Imported American UE double-pole double-throw explosion-proof pressure switch H122-612 Measuring principle: piston measuring system 303 wetted material with nitrile rubber sealing ring Pressure port 1/4NPT inner wire stainless steel port Measuring range: 200 -3000PSI /13.8-206.8bar Pressure resistance 689.5bar related terms Accuracy: A value indicating the degree of precision of the device, including linearity, tolerance, hysteresis, repeatability, etc. At present, the highest precision of Nagano's pressure switch can reach ±0.5%FS, and the model is CB33. Maximum pressure (Max.P): the maximum value of the pressure range. Full Scale (FS): The difference between the maximum and minimum values ​​of the pressure range. Connection difference (dead zone): It refers to the difference between the switch setting action value and the reset value. For example, when the set value is 1MPa and the actual reset value is 0.9MPa, the connection difference is 0.1MPa. Working temperature: refers to the temperature range in which the internal mechanism and sensitive components of the instrument will not undergo continuous deformation during operation. Generally, the recommended operating temperature range of the pressure switch is -5~400C. If the temperature of the medium is too high, it can be considered to add an accessory siphon (filling shape) to achieve the purpose of cooling. SPDT (Single Pole Double Throw): Consists of a normally open, a normally closed contact and a common terminal. DPDT (Double Pole Double Throw): It consists of a symmetrical left and right common terminal, and two sets of normally open and normally closed terminals. Upper limit one contact (normally open): When the pressure rises to the set value, the contact will act and the circuit will be turned on. Lower limit one contact (normally closed): When the pressure drops to the set value, the contact will act and the circuit will be turned on. 0140 Gold contacts M201 factory setting, need to specify the rising or falling setting The M277 nameplate uses kPa or MPa as the pressure range unit, factory selected. not suitable for temperature switches M278 uses kg/cm2 as the pressure unit on the nameplate, not applicable to temperature switches M405 complies with European ATEX intrinsically safe standards M406 complies with the Russian Gosgortechnadzor flameproof intrinsically safe standard M421 explosion-proof junction box, only suitable for Russian explosion-proof standards M423 ATEX Compliant Flameproof Junction Box M430 Lid lock M444 Paper Signs M446 stainless steel tag M460 external grounding screw; for non-metallic piping systems (ATEX installations) M480 differential pressure switch type K, 316 stainless steel pressure port, sensor material cannot be changed. M511 1 / 4" NPT male interface for sensor numbers 3, 4, 5, 6 and 8 M513 UL/CSA listed, explosion proof junction box, pre-wired (NEMA4 compliant). Not ATEX compliant. M515 DIN connector - 4 terminals; conforms to DIN 43650 Form A, (not suitable for Zone 1 & 2 or ATEX requirements). Not available with DPDT or metric electrical thread interface M521 LF4 Medium pressure 1/4” NPT female port; available sensor types P4 and P9 M522 LM4 Medium pressure 1/4” NPT male port; available sensor types P4 and P9 M523 LF6 Medium pressure 3/8” NPT female port; available sensor types P4 and P9 M524 LM6 Medium pressure 3 / 8” NPT male port; available sensor types P4 and P9 M525 HF4 High pressure 1/4” NPT female port; available sensor types P4 and P9 M526 HM4 High pressure 1/4” NPT male port; available sensor types P4 and P9 M527 HF6 High pressure 3/8” NPT female port); available sensor types P4 and P9 M528 HM6 High pressure 3/8” NPT male port; available sensor types P4 and P9 M540 Viton (dead band and low pressure range will be slightly increased): for sensor type K, sensor type 8, sensor type P M541 EPDM O-ring for sensor types 5, 6 and P M550 氧清洗，内部结构和材料可能会发生变化（包括氟橡胶膜片和/ 或O 形圈时适用）。不适用于传感器类型3，4 和8 M924 7/16-20 SAE（内螺纹）不锈钢压力接口。 适合于编号为6 的传感器 NC1 NACE 的证书，不适合于温度传感器及K 型传感器 系列号-型号 设定点可调范围 死区 最大过压范围 耐压 压力接口 接液材料 H122-S156B 0 to 6.9 bar 13.8 mbar to 0.1 bar 6.9 bar 8.6 bar 1/2" NPTF 316L st/st H122-164 0 to 13.8 bar 20.7 mbar to 0.1 bar 13.8 bar 13.8 bar 1/4" NPTF Ni Plated Brass-Brass H122-270 0 to 13.8 bar 0.1 to 0.6 bar 13.8 bar 17.2 bar 1/4" NPTF Ni Plated Brass-Ph Bronze H122-358 0 to 13.8 bar 0.1 to 0.6 bar 13.8 bar 17.2 bar 1/4" NPTF 316L st/st H122-S164B 0 to 13.8 bar 20.7 mbar to 0.1 bar 13.8 bar 13.8 bar 1/2" NPTF 316L st/st H122-274 0 to 20.7 bar 0.1 to 0.7 bar 20.7 bar 24.1 bar 1/4" NPTF Ni Plated Brass-Ph Bronze H122-361 0 to 20.7 bar 0.1 to 0.6 bar 20.7 bar 24.1 bar 1/4" NPTF 316L st/st H122-703 2.1 to 20.7 bar 0.1 to 0.5 bar 20.7 bar 68.9 bar 1/4" NPTF Ni Brass-Buna N-Buna N H122-376 0 to 34.5 bar 0.2 to 0.8 bar 34.5 bar 39.6 bar 1/4" NPTF 316L st/st H122-704 3.4 to 34.5 bar 0.2 to 0.8 bar 34.5 bar 172.4 bar 1/4" NPTF Ni Brass-Buna N-Buna N H122-705 13.8 to 68.9 bar 0.3 to 1.7 bar 68.9 bar 172.4 bar 1/4" NPTF Ni Brass-Buna N-Buna N H122-612 13.8 to 206.8 bar 2.8 to 17.2 bar 413.7 bar 689.5 bar 1/4" NPTF 303 st/st-303 st/st-Buna N H122-614 34.5 to 413.7 bar 3.4 to 27.6 bar 413.7 bar 689.5 bar 1/4" NPTF 303 st/st-303 st/st-Buna N   

注：除H121-612-1010-M201进口美国UE双刀双掷防爆压力开关，更多United Electric(UE)型号欢迎电话或在线联系。

本文出自 深圳沃德科技官网，转载时请注明出处及相应链接。

本文永久链接：https://www.szword.com/zs/ue62314.html