美国UE温度开关F100-8BS（US UE temperature switch F100-8BS ）

US UE temperature switch F100-8BS Measuring principle  The mechanical temperature switch uses special silicone oil with a stable thermal expansion coefficient. After feeling the temperature change, thermal expansion and contraction occur, resulting in deformation and displacement. signal output.  Classification  UE mechanical temperature switches are further divided into two categories: local in-line mechanical temperature switches and remote capillary mechanical temperature switches. Mechanical temperature switches are divided into brass and stainless steel according to different temperature measuring elements.  Technical advantages  Mechanical temperature switches have the high reliability of mechanical switches. And the output of high-capacity switching signal is also convenient for users to directly control some simple actuators. The local in-line mechanical temperature switch is easy to install and easy to fix the meter head. However, because it is relatively close to the electronic micro switch, the temperature resistance is not as high as that of the remote capillary mechanical temperature switch. In some working conditions where there is no local installation position, the remote capillary mechanical temperature switch can separate the meter head from the local temperature package, and the insertion depth is more flexible. The standard capillary length of the mechanical temperature switch is 1.8m, which can be extended up to 15m according to different requirements of customers.  Technical parameters  Storage temperature -65 to 160℉(-54—71℃) Ambient temperature -40 to 160℉(-40 to 71℃); 520-525, 540-548, 700-706, 15731-15736: 0 to 160 ℉(-18 to 71℃); for every 50℉(28℃) change in ambient temperature, the typical drift value of the set point is less than 1% of the full scale Set point repeatability: temperature switch: ±1% of the adjustable range; Shock resistance: After 10 milliseconds, 15G shock test, the set point can be reproduced Vibration resistance: After 2.5G, 5-500Hz vibration test, the set point can be reproduced Housing: Cast aluminum alloy die-cast housing; epoxy resin Coating; stainless steel tamper-resistant scale cover clamping screw with gasket.  Enclosure Rating: Meets NEMA 4X requirements. Switch Output: One single pole double throw (SPDT) snap action switch; can be wired as "normally open" or "normally closed"  contacts Electrical ratings: 15A, 125/250/480VAC; B100-13546 and E100-13545: 22A/480VAC. 24-30VDC, 2A resistor, 1A inductor. 125VDC, 0.5A resistor, .03A inductor.  Weight: 2-7 lbs; (varies by model) Electrical Connection: 1/2"  NPTF  port; 2 x 7/8" diameter knockouts -13545, 10' 304 Stainless Steel. In            -Line: Nickel Plated Brass (Standard Length); B100-13546 Stainless Steel; Optional 316L Stainless Steel.  Filling: Type 1BS/BC: Solvent filling; Type 2-8: Non-toxic oil filling  Temperature dead zone: Type F: 1% typical; Type B, C, E: Under laboratory conditions, typical is set 2% of point range  Heat Tracking and Low Temperature Protection: The thermostat is specially designed for applications such as heat tracking and low temperature protection. There are B100 and E100 switches  available for ambient tracking.  

注：除美国UE温度开关F100-8BS，更多United Electric(UE)型号欢迎电话或在线联系。

本文出自 深圳沃德科技官网，转载时请注明出处及相应链接。

本文永久链接：https://www.szword.com/zs/ue62557.html