美国UE本安型双点温度开关C402-120-I275（U.S. UE intrinsically safe dual-point temperature switch C402-120-I275 stock spot ）

U.S. UE intrinsically safe dual-point temperature switch C402-120 -I275 in stock Copper; insertion depth is 475mm;commonly used modelsB400-120 B400-121 B402-120 B402-121 B403-120 B403-121C400-120 C400-121 C402-120 C402-121 C403-120 C403-121US UE400 series temperature switch Model descriptionB400, single-point output, in-line, internal adjustment with reference scaleB402, two-point output, in-line, internal adjustment with reference scaleB403, three-point output, in-line, internal adjustment with reference scaleC400, single Point output, in-line, internally adjustedC402, two-point output, in-line, internally adjustedC403, three-point output, in-line,internallyadjusted The wire interface or a termination box (stopping box) to form, through the certification of EEX d IIC. These parts must be connected from the relevant interface of the device, there must be at least 5 wires connected and the length must be 8mm. These parts are not included in the approvals for use in hazardous area environments. To prevent fire, seal all pipes within 18 inches of the enclosure. When installing, please use a wrench to hold the hexagonal thread on the temperature switch housing. Do not pull the housing directly to tighten, this will damage the sensor and loosen the welded body.Try to avoid installing the temperature switch in an environment with severe vibration and large temperature fluctuations. A proper installation position can effectively prevent moisture from entering the enclosure. Explosion-proof devices must be used. Do not install it in an environment where the temperature is lower than -40℉ (-40℃) or higher than 160℉ (71℃). US UE temperature switch selection guide Type B121 (in-line, single-point output, externally adjustable, with reference scale, single conduit) B122 (in-line, dual-point output, externally adjustable, with reference scale, single Conduit) Type C120 (in-line, single-point output, internally adjustable, without reference scale, double conduit) Type E121 (temperature bulb and capillary type, single-point output, externally adjustable, with reference scale, single conduit) ) Type E122 (bulb and capillary type, dual-point output, externally adjustable, with reference scale, single conduit) Type F120 (temperature bulb and capillary type, single-point output, internally adjustable, without reference scale, double conduit ) Type 820E (bulb and capillary, single output, externally adjustable, with temperature indicator, dual conduit) Type 822E (bulb and capillary, dual output, externally adjustable, with temperature indicator, dual Conduit) Type H100 (Pressure Switch) One Single Pole Double Throw (SPDT) Output, NEMA Housing, Epoxy Coated, Internally Adjustable Type H100K (Differential Pressure Switch) One Single Pole Double Throw (SPDT) Output, NEMA Housing, Epoxy Coated, internally adjustable Type B100 (in-line temperature switch) one single pole double throw (SPDT) output, NEMA housing, internally adjustable with reference scale Type C100 (in-line temperature switch) one single pole double throw (SPDT) Output, NEMA enclosure, internally adjustable, without reference scale Model E100 (bulb and capillary) one single pole double throw (SPDT) output, NEMA enclosure, internally adjustable, with reference scaleF100 type (bulb and capillary type) one single pole double throw (SPDT) output, NEMA shell, internally adjustable, no reference scale

注：除美国UE本安型双点温度开关C402-120-I275，更多United Electric(UE)型号欢迎电话或在线联系。

本文出自 深圳沃德科技官网，转载时请注明出处及相应链接。

本文永久链接：https://www.szword.com/zs/ue69818.html