美国UE温度开关E100-5BCE100-8BC（US UE temperature switch E100-5BC E100-8BC ）

Working principle  The principle of the UE mechanical temperature switch is the same as that of the pressure switch. The mechanical temperature switch uses special silicone oil with a stable thermal expansion coefficient. Finally start the micro switch at the top to make the electrical signal output.  Application Guide  Mechanical temperature switches are widely used in various pipelines and tanks. UE mechanical temperature switches are used for interlock protection of important dangerous equipment due to their excellent reliability. Such as the temperature control of the lubricating oil tank or the temperature control of the pipeline. It involves a wide range of industries, such as electric power, petroleum refining, offshore platforms, oil pipelines, chemical industry, environmental protection, metallurgy, pharmaceuticals and many other industries.  UE100 series mechanical temperature switch parameters:  storage temperature -65 to 160℉ (-54—71℃) ambient temperature -40 to 160℉ (-40 to 71℃); 520-525, 540-548, 700-706, 15731- 15736: 0 to 160°F (-18 to 71°C); for every 50°F (28°C) change in ambient temperature, the typical drift of the set point is less than 1% of the full range Set point repeatability: temperature switch: adjustable range ±1% of ±1%; shock resistance: after 10 milliseconds, 15G shock test, the set point can be reproduced Anti-vibration: after 2.5G, 5-500Hz vibration test, the set point can be reproduced Shell: cast aluminum alloy die-casting shell body; epoxy resin coating; stainless steel anti-jamming scale cover clamping screw with gasket.  Enclosure Rating: Meets NEMA 4X requirements.  Switch Output: One Single Pole Double Throw (SPDT) snap action switch; can be wired as "Normally Open" or "Normally Closed" Contact electrical rating: 15A, 125/250/480VAC; B100-13546 and E100-13545: 22A/480VAC. 24-30VDC, 2A resistor, 1A inductor. 125VDC, 0.5A resistor, .03A inductor.  Weight: 2-7 lbs; (varies by model) Electrical Connection: 1/2"  NPTF  port; 2 x 7/8" diameter knockouts -13545, 10' 304 Stainless Steel. In            -Line: Nickel Plated Brass (Standard Length); B100-13546 Stainless Steel; Optional 316L Stainless Steel.  Filling: Type 1BS/BC: Solvent filling; Type 2-8: Non-toxic oil filling  Temperature dead zone: Type F: 1% typical; Type B, C, E: Under laboratory conditions, typical is set 2% of point range  Heat Tracking and Low Temperature Protection: The thermostat is specially designed for applications such as heat tracking and low temperature protection. There are B100 and E100 switches  available for ambient tracking.  

注：除美国UE温度开关E100-5BCE100-8BC，更多United Electric(UE)型号欢迎电话或在线联系。

本文出自 深圳沃德科技官网，转载时请注明出处及相应链接。

本文永久链接：https://www.szword.com/zs/ue80152.html