美国UE温度开关E403-2BSB带温包（American UE temperature switch E403-2BSB with temperature bulb and capillary ）

American UE temperature switch E403-2BSB with temperature bulb and capillary application guide Mechanical temperature switches are widely used in various pipeline tanks. UE mechanical temperature switches are used for interlock protection of important dangerous equipment due to their excellent reliability. Such as the temperature control of the lubricating oil tank or the temperature control of the pipeline. It involves a wide range of industries, such as electric power, petroleum refining, offshore platforms, oil pipelines, chemical industry, environmental protection, metallurgy, pharmaceuticals and many other industries. text-transform:none;font-style:normal;font-size:10.5000pt;mso-font-kerning:1.0000pt;" >E403-2BSA E403-2BSB E403-3BS E403-4BS E403-5BS E403-8BS installation attention Matters needing attention: Please use a wrench to hold the hexagonal thread on the housing of the temperature switch during installation.Do not directly pull the housing to fasten it, which will damage the sensor and loosen the welded body.Try to avoid installing the temperature switch under severe vibration , In an environment with large temperature fluctuations. A suitable installation location can effectively prevent moisture from entering the enclosure. Explosion-proof devices must be used. Do not install it at a temperature lower than -40°F (-40°C) or higher than 160°F (71 ℃).*Do not strike any plugs on models 820E or 822E.C120, F120, and 820E, 822E housings are equipped with two 3/4" NPT electrical connection conduits, one of which is 3/4" "Explosion-proof model. When one of the conduits is in a sealed state, the other electronic conduit can be used during installation. The explosion-proof plug must be sealed well during installation.When remote-mounting the temperature controllers of models E121, E122, and F120, they must be installed vertically (the thermostat faces down) or horizontally (the vent faces down). When installing horizontally, make sure that the conduit connections are leak-tight. The controller can be surface-mounted through the four 1/4" screw holes on the shell or the mounting bracket. E400 temperature switch model description E400 type, single point output, temperature bulb and capillary tube type, internal adjustment with reference scale; E402 type, two-point output, temperature bulb and capillary type, internal adjustment with reference scale; E403 type, three-point output, temperature bulb and capillary type, internal adjustment with reference scale; E400-2BSA E400-2BSB E400-3BS E400-4BS E400-5BS E400-8BS E402-2BSA E402-2BSB E402-3BS E402-4BS E402-5BS E402-8BS E403-2BSA E403-2BSB E403-3BS E403-4BS E403-5BS E403-8BS(Editor in charge: www.xaqksm. com)

注：除美国UE温度开关E403-2BSB带温包，更多United Electric(UE)型号欢迎电话或在线联系。

本文出自 深圳沃德科技官网，转载时请注明出处及相应链接。

本文永久链接：https://www.szword.com/zs/ue90000.html