1XSWHL-P14UE电子压力开关1XSWHL-P15（1XSWHL-P14 American United Electric UE electronic pressure switch 1XSWHL-P15 ）

American UE electronic pressure switch 1XSWHL replaces the original model 2W3A and 2X3A American UE electronic ONE series pressure switch main parameters Power input/switch output: (Screenshot) Accuracy: At room temperature, the error is 0.5% Repeatability: Repeatability is 0.1% Operating Ambient Temperature Range: (Screenshot) Operating Display Temperature Range: 10°F (-12°C) 158°F (70°C) Long Term Stability: ±0.25% Full Scale Range/Year Maximum Temperature Drift: Per Degree Celsius 0.03% (0.12% for K10) Switching Response Time: ≤100 ms Display Required Response Time: 400 ms (2.5Hz) Response Time Delay: Between 250 ms and 2 seconds, software configured in 2-fold increments. Monitoring (IAW®): Can detect sensor open or short circuit; plugged port; power supply out of range; overload or normal load condition; microprocessor failure; keypad short circuit; switch failure, etc. Control mode: Field can change the output state, or change the rising or falling setpoint. Automatic or manual reset can be set. (Screenshot) Analog output: Compliant with NAMUR NE 43 4-20mA output, maximum 700ohms 24VDC, calibrated on site, 2:1 turn down ratio. Capable of indicating various error conditions at 3.6 mA. See installation manual for details Housing: Type 4X/IP66 certified polyester painted aluminum alloy 360. 4X/IP66, 360 alloy polyester painted aluminum. Dial: Polycarbonate pressure-sensitive keypad and display resistant to UV damage.Cover: Polyester-coated aluminum, built-in toughened glass Electrical interface: 3/4” NPT internal thread cast aluminum interface Common models of ONE series 1XSWHL-P14 1XSWHL-P12 1XSWHL-P10 1XSWHL-P11 1XSWHL-P13 1XSWHL-P14 1XSWHL- P15 1XSWHL-P16 1XSWHL-P17 1XSWHL-P18 1XSWHL-P19 1XSWHL-P20 1XSWHL-P06 1XSWHL-P08 1XSWHL-P06 1XSWHL-P08 U.S. UE Electronic Pressure Switch Optimal Performance Selection M041 Double Seal Option M201 Factory Set Point, Deadband And switch model (all 3 settings must be included with order - example below) M270 Display unit, temperature switch is in degrees Celsius. M275 Display unit, inches of water column M276 Display unit, bar or mbar M277 Display unit , kPa or MPa M278 Display unit, kg/cm2 M395 Explosion-proof grade conforms to the Ex d requirements of the Korean Professional Safety and Health Department (KOSHA) M396 Taiwan certification M406 Conforms to the Russian Gosgortechnadzor standard. (Not applicable to 2W4D) (As for the explosion-proof series models No, please inquire further) M444 Paper nameplate M446 Stainless steel nameplate M449 Mounting bracket 62169-40 (JIC models are only suitable for 2W, 4W and 8W models)M550 Oxygen Cleaned W073 Fits all TL and TR sensors with 1/2" NPT male compression assembly, see page 8 for details. W074 Fits all TR, TH and TC 2W2D, 2X2D, 2W4D, 2WLP, 8W2D and 8X2D models 1/2" NPT male thread adapter. W930 1/2” NPT male thread to G1/2 male thread adapter for measuring pressure sensor P10-P20. W932 1/4” NPT female thread to G1/2 male thread adapter for measuring differential pressure Sensors K11-K13 (2 required) 6361-752 Replacement cover assembly option 

注：除1XSWHL-P14UE电子压力开关1XSWHL-P15，更多United Electric(UE)型号欢迎电话或在线联系。

本文出自 深圳沃德科技官网，转载时请注明出处及相应链接。

本文永久链接：https://www.szword.com/zs/ue96010.html