美国UE可调死区压力开关H100-15732（US UE adjustable dead zone pressure switch H100-15732 ）

US UE adjustable dead zone pressure switch H100-15732 butyl rubber diaphragm and O-ring, brass pressure port, 1/4"NPTF, adjustable range 20-200psi, dead zone 12-26psi, maximum pressure 500psi, resistance Pressure 1000psi.UE100 series switch featuresH100 type (pressure switch) one single pole double throw (SPDT) output, NEMA shell, epoxy coating, internally adjustableH100K (differential pressure switch) one single pole double throw (SPDT) output, NEMA Housing, epoxy coated, internally adjustableType B100 (in-line temperature switch) one SPDT output, NEMA housing, internally adjustable, with reference scaleType C100 (in-line temperature switch) one SPDT Throw (SPDT) output, NEMA housing, internally adjustable, without reference scaleE100 type (temperature bulb and capillary type) one single-pole double throw (SPDT) output, NEMA housing, internally adjustable, with reference scaleF100 type (temperatureCapillary type) a single-pole double-throw (SPDT) output, NEMA housing, internally adjustable, no reference scaleUS UE pressure switch is widely used in household, commercial, automotive refrigeration systems for high and low pressure protection control, steam conditions and power stations ;Accumulators, receivers, flash tanks, separators, scrubbers, oil refining units. It is also suitable for high and low pressure protection control of various equipment tools. But in the selection of pressure switches, the following points must be paid attention to :1. Necessity of explosion-proof: explosion-proof type is divided into flameproof type and intrinsically safe type.2. Whether it is necessary to have instructions: according to customer instructions.3. Number of contacts: one contact (one output) or two contacts (two outputs)4.ofsetting value and pressure range: the recommended setting range is between 30% and 65% of the pressure range, and the settable range is between 15% and 90% of the pressure range.Form: adjustable or fixed.6. Whether there is pulsation: If the pressure pulsates or vibrates, a throttle valve is required to suppress the damage to the instrument caused by the pulsating pressure. 7. Occasions with a diaphragm: When measuring corrosiveness, high viscosity or high temperature, it is necessary to use a diaphragm.

注：除美国UE可调死区压力开关H100-15732，更多United Electric(UE)型号欢迎电话或在线联系。

本文出自 深圳沃德科技官网，转载时请注明出处及相应链接。

本文永久链接：https://www.szword.com/zs/ue33477.html